Yes. Construction arbitrage is legal in Saskatchewan. You hold the contract, your licensed subs do the work, you keep the spread. Saskatchewan has no provincial general contractor licence for renovation or commercial work - no exam, no registration with a provincial body. The compliance weight falls on TSASK trade licences for your subs, WCB Saskatchewan clearances before every payment, and a tax picture that most people get wrong because Saskatchewan PST applies to construction labour.
I work with operators running this model in Canada. Saskatchewan's setup is simpler on the GC licence side than most provinces, but the PST and WCB rules have teeth. Here is what actually matters before you take a contract in this province.
Is construction arbitrage legal in Saskatchewan - what the law actually says
Construction arbitrage means winning the prime contract, subcontracting the physical labour to specialist trades, and keeping the margin between the two prices. Some people call it contractor arbitrage or construction dropservicing - same model, different name. The legal position globally is that the structure is standard contracting, completely legal, and the real compliance question is about licences, insurance and tax.
In Saskatchewan, there is no law that says a main contractor cannot subcontract all physical work. That is how most commercial builds, large renovation contracts, and multi-unit residential projects run in this province. The main contractor holds the prime contract, coordinates the work, manages risk, and uses specialist trades for the physical labour. Saskatchewan law is built around that model.
The Canada country-level overview covers the federal picture - no national GC licence, T5018 reporting, federal GST. This post goes one level deeper into Saskatchewan specifically. If you are comparing provinces, the Alberta post and the Ontario post show how the picture looks in those markets.
No provincial GC licence - what that means in practice
Saskatchewan has no provincial general contractor licence for renovation or commercial construction work. No provincial body licences general contractors doing those types of projects. You do not sit an exam. You do not register with a province-wide construction board.
This is a genuinely clean position for the arbitrage model. Compare it to a province like Ontario, where the HCRA licences new home builders, or British Columbia, where BC Housing licences new residential builders. In Saskatchewan, even those requirements are narrower - what exists is about new home warranty, not general contracting broadly.
For renovation contracts and commercial work, your compliance obligations come from four places: municipal building permits, TSASK trade licences on your subs, WCB Saskatchewan coverage, and tax registration. Not a GC licence.
TSASK - trade licences your subs must hold
The Technical Safety Authority of Saskatchewan (TSASK) is the body that licences electrical and gas contractors in this province. This is where the compliance burden sits for the arbitrage model in Saskatchewan.
Electrical contractors. For any electrical work above 200 amps or 240 volts, polyphase circuits, hazardous locations, renewable energy systems, EV chargers, battery storage or generators, the work must be done by a TSASK-licensed electrical contractor. That means your electrical sub needs a full Electrical Contractor licence from TSASK. The qualifier must hold a valid journeyperson certificate with an inter-provincial Red Seal, and must have held that certificate for at least two years. A $10,000 surety bond is required. The licence fee is $225 for a three-year licence. Verify every electrical sub at tsask.ca before they start work.
Gas and HVAC contractors. Any gas line work - connections, extensions, appliance installations - requires a TSASK General Gas Contractor licence. The bond requirement is $10,000. Individual gas fitters working under the contractor also need their own TSASK Gas Fitter licence. HVAC work that involves gas connections falls under this requirement.
Plumbing. Plumbing permits in most of Saskatchewan are pulled through TSASK, and a licensed journeyperson plumber must be named on the permit. TSASK does not issue a separate plumbing contractor licence the way it handles electrical - the journeyperson is the licence holder. For permit work, your plumbing sub must hold a valid journeyperson certificate.
Excluded cities - check separately. TSASK's jurisdiction excludes Regina, Saskatoon, Lloydminster and the Global Transportation Hub. Those cities run their own licensing and permit systems. Saskatoon requires licensed plumbing contractors to register with the City of Saskatoon directly. If you are working in any of those cities, check with the local authority before subcontracting - your sub needs the right licence for that specific jurisdiction.
WCB Saskatchewan - clearances before every payment
WCB Saskatchewan is not optional for construction employers. This is a private market system (unlike some provinces) but it is mandatory for employers in the construction industry.
The single most important WCB rule for construction arbitrage is the clearance certificate. Before you release payment to any subcontractor for work completed, you are required by WCB policy to get a clearance letter confirming the sub is registered and in good standing. Request it at wcbsask.com. If you release payment without a clearance and the sub has unpaid WCB premiums, you can be held liable for those premiums on the labour portion of the contract. This is not a theoretical risk - WCB enforces it.
The good standing letter and the clearance letter are different. A good standing letter tells you a sub's account is active before they start - useful but not enough. The clearance letter must come before payment is released. For ongoing construction work, ask about term clearances - these renew quarterly and are designed for companies that work with subs regularly.
Under WCB policy POL 21/2025, effective January 1, 2026, principals contracting for services in Saskatchewan must report those contractors when registering and when filing the annual Employer's Payroll Statement. Build this into your process from day one.
The 2026 premium rates per $100 of assessable payroll: B11 Construction Trades at $1.62, B12 Residential Construction at $2.46, B13 Commercial and Industrial Construction at $1.83. These are your subs' rates - they pay WCB based on their own payroll, not yours. Your obligation as principal is to verify their coverage and get the clearance before you pay.
Tax - the PST on labour rule most people miss
Saskatchewan charges 5% GST plus 6% PST, for a combined rate of 11% on construction contracts. The number is straightforward. The rule people get wrong is what PST applies to.
In most provinces, provincial sales tax applies to goods but not to labour and services. Saskatchewan is different. PST applies to the total contract charge, including labour. If you invoice a client for a renovation job - labour plus materials - you collect 6% PST on the whole amount, not just the materials portion. This is set out in the province's PST-12 bulletin and applies to real property improvement contracts.
The good news is that the tax flows properly through the chain. When you subcontract the work, your sub does not charge you PST on their invoice, as long as you give them your PST vendor's licence number. That number goes on the invoice. You then collect PST on the full contract from your client and remit it to the provincial Ministry of Finance. The sub handles PST on their own tools, equipment and consumables - that cost stays with them.
GST is handled through the federal CRA system. Register once your revenue exceeds $30,000 in four consecutive quarters. GST is recoverable through input tax credits. Provincial PST is not - it is a real cost in your numbers.
For T5018 reporting: if construction services make up more than 50% of your business income, you must file T5018 slips with the CRA for every sub paid more than $500 in the year. This is a federal requirement that applies in Saskatchewan the same as everywhere else in Canada.
Independent contractor status - the Sagaz test
Saskatchewan uses the common law independent contractor test established by the Supreme Court of Canada in 671122 Ontario Ltd v Sagaz Industries Canada Inc, 2001 SCC 59. The court asks whether the worker is performing services as a person in business on their own account. No single factor is decisive. The main factors are: the level of control the principal has over how the work is done, whether the worker provides their own equipment, whether the worker can subcontract or hire helpers, whether there is financial risk to the worker, and the degree to which the work is integrated into the principal's business.
For construction arbitrage, your subs should be running their own businesses - their own tools, their own WCB accounts, their own equipment, free to take other contracts. The Sagaz test works in your favour when the sub genuinely operates independently. Where it comes back to bite operators is when a sub works exclusively for one principal over a long period, uses that principal's tools and van, and operates more like a de facto employee.
Saskatchewan's Employment Act prevents parties from contracting out of employment standards protections. A written agreement calling someone an independent contractor does not override the substance of the relationship. Keep the substance clean.
Business setup - what you need before your first contract
Before taking a contract in Saskatchewan, you need:
A Saskatchewan business registration through ISC (Information Services Corporation). Check the Saskatchewan Business Registry for name availability and register the entity. For anything beyond sole trader, incorporate provincially or federally.
A CRA business number. Register for GST if you are at or near the $30,000 threshold. Register for PST with the Saskatchewan Ministry of Finance and get your PST vendor's licence number - you need that number to give to your subs so they do not charge you PST on their invoices.
A WCB Saskatchewan employer account. Register before your first worker or sub arrangement starts.
Municipal business licences if you are based in Saskatoon, Regina or other cities that require them. This is a city-level requirement, not provincial.
The honest picture for construction arbitrage in Saskatchewan
The model is legal here. The compliance load is manageable - no GC licence makes the province accessible, and the WCB and TSASK requirements are clear and verifiable. The two things that catch people are the PST on labour (which most people from other provinces do not expect) and the WCB clearance rule (which looks administrative but becomes a real liability if you skip it).
Run construction arbitrage in Saskatchewan the same way you would anywhere: win the prime contract, verify your subs' TSASK licences and WCB standing before they start, get clearances before you pay, charge PST on the full invoice, and keep the spread.
Last checked: 18 November 2026.
Frequently asked questions
Is construction arbitrage legal in Saskatchewan?+
Yes. Construction arbitrage is legal in Saskatchewan. Winning the prime contract, subcontracting the physical work to specialist trades, and keeping the spread is how general contracting already operates in this province. There is no provincial law that bans subcontracting all physical work. The real requirements are compliance - WCB Saskatchewan coverage and clearance certificates, the right TSASK licences on each trade sub, and 5% GST plus 6% PST on your contracts with clients.
Do I need a GC licence to do construction arbitrage in Saskatchewan?+
No. Saskatchewan has no provincial general contractor licence for renovation or commercial construction work. No provincial body licences general contractors doing those types of projects. You set up your business, register with the CRA and Saskatchewan Business Registry, sort your WCB Saskatchewan account, and win contracts. The compliance layer comes from TSASK trade licences on your subs, municipal building permits, and WCB clearances - not from a GC licence.
What TSASK licences do my trade subs need in Saskatchewan?+
Every electrical sub must hold a TSASK Electrical Contractor licence - the qualifier needs a valid journeyperson certificate with Red Seal credentials held for at least two years, plus a $10,000 bond. Gas and HVAC subs need a TSASK General Gas Contractor licence, also with a $10,000 bond. For plumbing outside Saskatoon and Regina, permits run through TSASK with a journeyperson plumber pulling the permit. Saskatoon, Regina, and Lloydminster have their own licensing systems, so check with those cities directly for work there.
How does WCB Saskatchewan work for construction arbitrage?+
WCB Saskatchewan is mandatory for employers in the construction industry. Before you release any payment to a subcontractor, get a clearance letter from wcbsask.com confirming the sub is registered and in good standing - the clearance is required by policy, not optional. If you skip it and the sub has unpaid WCB premiums, you can be held liable for those premiums on the labour portion of the contract. Request a good standing letter before work starts, and a clearance before you pay. Term clearances are available for regular construction work and renew quarterly.
What taxes apply to construction arbitrage in Saskatchewan?+
Saskatchewan charges 5% GST plus 6% PST, for a combined 11% on construction contracts. The unusual part is that Saskatchewan PST applies to the total charge including labour - most provinces only apply sales tax to goods, not labour. You collect PST from your client on the full contract amount. Your sub does not charge PST to you if you give them your PST vendor's licence number; you handle PST at the client level. Register for GST with the CRA once revenue exceeds $30,000 in four consecutive quarters. File T5018 slips for sub payments over $500 when construction is more than 50% of your business income.
Is construction arbitrage the same as construction dropservicing in Saskatchewan?+
Yes - same model, different name. Construction dropservicing, contractor arbitrage and construction arbitrage all describe the same structure: you hold the prime contract, your TSASK-licensed subs do the physical work, you keep the margin. All the same Saskatchewan compliance requirements apply regardless of what you call it - WCB Saskatchewan, TSASK trade licences, PST registration, municipal building permits.
Mohamed El HadriCo-Founder
I'm a co-founder of several construction companies. I built a construction business from a 30-van operation into a lean model with 1,500+ subcontractors in the database - winning the work as the main contractor, subbing it out, and running it as a system from a laptop across multiple countries. I write this site from what actually works.
@mointhemarket · 35.1k followers on Instagram →Run the model with people who already do
Reading the method is step one. Inside Construction Arbitrage Players you connect with players from around the world who run construction arbitrage every day and make real money from it - share your deals, get answers, and get in the game. Founding-member access is open now.
For the operator life and the inside story, see Contractor Club.
THE EDGE - the listening book on how the money really moves through a contracting business - is out now. Listen free, or see what is inside.
The Family Secret - how construction arbitrage really works - is coming soon.
A construction business built this way is a sellable asset
Systems, subs and margin - that is exactly what buyers pay for. If you own a construction or trade business and the exit is on your mind, list it on ContractorExit, the marketplace for buying and selling trade businesses. The valuation is free, so you find out what it is worth before you decide anything.
Get the Construction Arbitrage playbook
One sharp email a week: real numbers, live deal breakdowns, and the systems that let you run jobs you never visit. No fluff, unsubscribe anytime.



