ConstructionArbitrage
Foundations

Is Construction Arbitrage Legal in Alberta?

Construction arbitrage is legal in Alberta. No provincial GC licence for renovation or commercial work. NHBPA for new homes. WCB-Alberta mandatory.

Mohamed El HadriMohamed El HadriCo-Founder15 Nov 20269 min read
A general contractor in a hard hat and high-vis vest reviews blueprints with a subcontractor at a residential timber-frame construction site in Alberta, Rocky Mountains visible in the distance under a wide blue sky.

Yes. Construction arbitrage is legal in Alberta. You hold the contract, your certified subs do the work, you keep the spread. Alberta has no provincial general contractor licence for renovation or commercial work - which is a bigger deal than most people realise when they first look at the province. The compliance load falls on WCB-Alberta, your trade subs' AIT certifications, and the NHBPA builder licence if you are building new homes.

I have run this model across the UK and I work with operators in Canada. Alberta's picture is clean on the GC side and demanding on the trade-licence and WCB side. Here is what actually matters before you take a contract.

Construction arbitrage means winning the work, subcontracting the physical labour to specialist trades, and keeping the margin between the two prices. Some people call it contractor arbitrage or construction dropservicing - same model. The legal position globally is that the structure is standard contracting, completely legal, and the real question is compliance.

In Alberta, there is no law that says a main contractor cannot subcontract all physical work. That is how most commercial builds, large renovation contracts, and multi-unit residential projects are delivered in this province. The main contractor holds the prime contract, coordinates, manages risk, and uses specialist trades to do the physical work. Alberta law is built around that model.

The Canada country-level overview covers the federal picture - no national GC licence, T5018 reporting for sub payments, federal GST registration. This post goes one level deeper into Alberta specifically. If you are comparing provinces, the Ontario post and the British Columbia post show how the picture looks on the other side of the country.

No provincial GC licence for renovation or commercial work

This is the most important point for anyone researching Alberta. There is no provincial general contractor licence you need to hold to operate as a main contractor on renovation or commercial projects.

No provincial board licences general contractors doing renovation or commercial work in Alberta. No exam. No registration with a province-wide body. You set up your business, register with the CRA, get your WCB-Alberta account sorted, and win contracts. The compliance layer for GC work comes from municipal building permits, the Safety Codes Act, and the sub trade licences I cover below - not from a provincial GC licence.

This is different from states like California, where the CSLB licences all contractors, or Oregon, where the CCB requires registration for any construction work. Alberta does not have that layer for renovations and commercial work.

NHBPA builder licence - new home builders only

The one provincial construction licence in Alberta is the builder licence under the New Home Buyer Protection Act (NHBPA). It applies only to businesses that build or sell new homes.

Under the NHBPA, it is illegal to build or sell a new home in Alberta without a valid builder licence. Every new home must also be registered in the New Home Buyer Protection System before construction starts, and warranty coverage must be in place.

There are two licence types. The General Contractor licence covers projects where the Alberta Building Code does not require a coordinating registered professional - typically new homes up to four dwelling units. The Developer licence covers larger projects where a coordinating registered professional (an architect or engineer) is required.

Fees as of my last check: $600 for a new licence, $500 for renewal, plus a $95 registration fee per residential unit. Apply through the Builder's Portal at alberta.ca/builder-licensing.

Starting January 1, 2027, all new licence applicants and renewals must demonstrate competency in four core areas: construction safety and quality, customer experience, construction supervision and project management, and contract and contractor management. That change was added under Order in Council 352/2025.

If you are doing renovations, commercial work, or any project that is not a new home, the NHBPA licence does not apply to you.

Trade licences - AIT certification required on every specialist sub

Alberta regulates trades through its Skilled Trades and Apprenticeship Education Act (STAEA) and the AIT (Apprenticeship and Industry Training) system. This is where the compliance burden sits for the arbitrage model in this province.

Electricians. Electrical installation, alteration and repair must be carried out by an AIT-certified journeyperson or a registered apprentice under direct supervision. Alberta has had a single Electrician trade but as of May 1, 2026, it now issues two separate journeyperson certificates: Construction Electrician and Industrial Electrician. Residential and commercial work takes the Construction Electrician route. Verify every electrical sub's AIT certificate before they start. Failed Safety Codes inspections stop work, and the liability for defects runs back up to you.

Plumbers and gas fitters. Plumbing work in Alberta requires an AIT-certified Journeyperson Plumber. Alberta's plumbing apprenticeship includes Gasfitter - Class B certification, so a certified plumber is qualified for most gas work. For higher-pressure gas systems, Gasfitter - Class A is a separate certification. ABSA (the Alberta Boilers Safety Association) oversees high-pressure piping and pressure equipment - check whether your project triggers any ABSA requirements.

HVAC. Refrigeration and air conditioning work has its own AIT trade certification. Gas-fired HVAC work ties back to the gasfitter credential. Confirm your HVAC sub's AIT certification for the specific trade they are doing.

As the main contractor you do not need to hold these certifications yourself. You need to verify that every sub does, and keep records of that verification. A Safety Codes officer can inspect at any point.

Safety Codes Act - permits and municipal compliance

Alberta's Safety Codes Act requires permits for most construction work. Permits are issued by municipalities through their Safety Codes Officers, or through private agencies authorised to administer permits on behalf of smaller municipalities.

The building owner holds primary responsibility for Safety Codes compliance. As the main contractor you have a duty to ensure compliance on the work your team is delivering. That means confirming permits are in place before work starts and that your subs pull their own trade permits where required.

Each trade typically pulls its own permit. Electrical, plumbing and gas subs apply for their own trade permits through the relevant municipal department. Calgary, Edmonton and other major centres have their own portals and processes - confirm the requirements with the relevant municipality before you price the job, because permit fees and timelines vary.

Municipal business licences are a separate layer. Edmonton, Calgary and other cities require a valid city business licence. Some require the contractor to hold the licence before applying for permits. Check with the city the job is in before you tender.

WCB-Alberta - register before you start

Workers' compensation is mandatory for construction employers in Alberta. You must open a WCB-Alberta account within 15 days of your first worker starting.

The critical rule for the arbitrage model is the business test. When you use a subcontractor, WCB-Alberta applies a test - Policy 06-01, Part II - to determine whether that sub is an independent business or whether they should be treated as your worker. A sub who passes the test and holds their own WCB-Alberta account is not treated as your worker. A sub who fails the test is treated as your worker, and you are responsible for reporting and paying premiums on their earnings. If that sub is injured, the claim is yours.

The practical protection is straightforward. Before every sub starts work, request a clearance letter from WCB-Alberta. It confirms whether the sub has an active account and is in good standing. Verify at wcb.ab.ca. Keep the clearance letters on file for every sub, every job.

If a sub is a small sole trader with no employees, their status under the business test may be less clear. When in doubt, request the clearance letter and confirm before you proceed.

Late registration incurs a penalty. Construction is listed as a mandatory-coverage industry. There is no grey area here - register as soon as you take on your first worker.

GST only - Alberta has no provincial sales tax

Alberta is the only province in Canada with no provincial sales tax. No PST. No HST. You charge 5% GST only on your construction invoices to clients.

Building materials and goods your subs supply also attract 5% GST. Construction services - the labour and project management component - are a taxable supply under the federal Excise Tax Act. Register for GST with the CRA once your annual revenue exceeds $30,000 in four consecutive calendar quarters. At that point you charge GST on your invoices and claim input tax credits on the GST you pay your subs and suppliers.

If construction income makes up more than 50% of your total business income, you need to file T5018 slips with the CRA for every sub you pay more than $500 in the year. T5018 reports contract payments and is a federal requirement - it applies equally in Alberta as in any other province.

The absence of PST is a real commercial advantage. When you are comparing margin stacks with operators in Ontario (13% HST) or BC (5% GST plus 7% PST on materials), Alberta's tax picture is cleaner.

What this means for running the model in Alberta

Construction arbitrage works in Alberta. The legal structure - win the work, sub the labour, keep the margin - is exactly how the province's construction industry is organised.

The compliance checklist is tighter on the trade side than in some other provinces. Alberta takes its trade certification seriously. Every specialist sub must hold a valid AIT journeyperson certificate in their trade. You need to verify that before they start, keep records, and not assume.

New home builds add the NHBPA layer. If you want to build new residential homes in Alberta, get the builder licence before you apply for a building permit. The 2027 competency requirements are coming, so if that is your direction, factor them into your planning now.

WCB-Alberta clearance letters are the other non-negotiable. Request one from every sub, every job. The alternative - carrying a claim from a sub's worker because the sub failed the business test - is not a risk worth taking.

If you want to understand how the model works before you tackle the compliance detail, the construction arbitrage guide is the place to start. The subcontractor network post covers how to build a database of certified subs you can actually trust.

Last checked: 15 November 2026.

Frequently asked questions

Is construction arbitrage legal in Alberta?+

Yes. Construction arbitrage is legal in Alberta. Winning the prime contract, subcontracting the physical work to specialist trades, and keeping the spread is how general contracting already works in this province. There is no provincial law that prohibits subcontracting all physical work. The real requirements are compliance - WCB-Alberta coverage for you and your subs, the right AIT trade certifications on each specialist sub, and an NHBPA builder licence if you are building or selling new homes.

Do I need a GC licence to do construction arbitrage in Alberta?+

No provincial general contractor licence exists for renovation or commercial construction work in Alberta. The only provincial construction licence is the NHBPA builder licence - and it only applies if you are building or selling new homes. For renovation and commercial contracts, there is no provincial body that licences general contractors. Your compliance obligations come from WCB-Alberta registration, AIT-certified trade subs, Safety Codes Act permits through your municipality, and a valid business registration.

What is the NHBPA builder licence and when do I need it?+

The Alberta builder licence is required under the New Home Buyer Protection Act for anyone building or selling new homes. If your construction arbitrage work involves new residential builds, you need a valid builder licence before applying for a building permit. There are two types: the General Contractor licence (homes up to 4 dwelling units where no coordinating registered professional is required) and the Developer licence (larger projects). Fees are $600 for a new licence and $500 for renewal, plus $95 per residential unit registered. Apply through the Builder's Portal at alberta.ca/builder-licensing.

Do my electrical subs need a licence in Alberta?+

Yes. Under Alberta's Skilled Trades and Apprenticeship Education Act, electrical installation, alteration and repair must be done by an AIT-certified journeyperson or a registered apprentice under direct supervision. As of May 2026, Alberta issues separate Construction Electrician and Industrial Electrician journeyperson certificates. Verify that every electrical sub holds a valid AIT certificate before they touch the wiring. Using an uncertified electrician on your project exposes you to failed inspections, stop-work orders under the Safety Codes Act, and potential liability for defects.

Is WCB-Alberta mandatory for construction arbitrage operators?+

Yes. Construction is a mandatory-coverage industry under WCB-Alberta. You must register within 15 days of your first worker starting. The key protection for the arbitrage model is the clearance certificate system - request a clearance letter from every subcontractor before they start work. If a sub fails WCB's business test and cannot hold their own account, WCB-Alberta treats them as your worker: any claim from that sub's worker becomes your liability. Always verify sub coverage before they set foot on site.

Does Alberta have HST like Ontario?+

No. Alberta is the only province in Canada with no provincial sales tax at all - no PST, no HST. You charge 5% GST only on your construction invoices to clients. Construction labour and services attract GST; building materials your subs supply also attract GST. Register with the CRA once your annual revenue exceeds $30,000 in four consecutive quarters. If your construction income is more than 50% of total business income, you also need to file T5018 slips with the CRA for sub payments over $500.

Is construction arbitrage the same as construction dropservicing in Alberta?+

Yes - same model, different name. Construction dropservicing, contractor arbitrage and construction arbitrage all describe the same structure: you hold the prime contract, your AIT-certified subs do the physical work, you keep the margin. All the same Alberta compliance requirements apply - WCB-Alberta, trade certifications, NHBPA licence for new homes, GST registration - regardless of what you call it.

Mohamed El Hadri

Mohamed El HadriCo-Founder

I'm a co-founder of several construction companies. I built a construction business from a 30-van operation into a lean model with 1,500+ subcontractors in the database - winning the work as the main contractor, subbing it out, and running it as a system from a laptop across multiple countries. I write this site from what actually works.

@mointhemarket · 35.1k followers on Instagram →
Join the players · now live

Run the model with people who already do

Reading the method is step one. Inside Construction Arbitrage Players you connect with players from around the world who run construction arbitrage every day and make real money from it - share your deals, get answers, and get in the game. Founding-member access is open now.

For the operator life and the inside story, see Contractor Club.

THE EDGE - the listening book on how the money really moves through a contracting business - is out now. Listen free, or see what is inside.

The Family Secret - how construction arbitrage really works - is coming soon.

Thinking about the exit?

A construction business built this way is a sellable asset

Systems, subs and margin - that is exactly what buyers pay for. If you own a construction or trade business and the exit is on your mind, list it on ContractorExit, the marketplace for buying and selling trade businesses. The valuation is free, so you find out what it is worth before you decide anything.

Get the Construction Arbitrage playbook

One sharp email a week: real numbers, live deal breakdowns, and the systems that let you run jobs you never visit. No fluff, unsubscribe anytime.