Yes. Construction arbitrage is legal in New Hampshire. You hold the prime contract, your licensed subs do the work, you keep the margin. New Hampshire is one of the few states in the US with no statewide general contractor licence or registration at all. The compliance picture here is simpler than most states - but your trade subs still need their own state licences, and workers' compensation has teeth.
The two things that catch people out in New Hampshire: hiring an unlicensed electrician is itself a criminal offence under RSA 319-C, and the state's independent contractor test for workers' compensation is strict - all seven criteria must be met, and courts here do not give much benefit of the doubt.
Is construction arbitrage legal in New Hampshire - what the law says
Construction arbitrage means you win the work, your subs do it, you keep the spread. Some call it contractor arbitrage or construction dropservicing - same model. The global picture on legality covers why the structure is legal everywhere. It is standard general contracting under a different name.
New Hampshire is cleaner than most states because it has no statewide general contractor licence. No exam. No registration. No board to deal with for GC work. You set up your business, win jobs, sub to properly licensed tradespeople, comply with local building permits, and sort your workers' compensation. That is the whole structure.
What the state does regulate, strictly, is the licensed trades. Electrical and plumbing work cannot be done by unlicensed people - full stop. And the state's independent contractor rules for workers' compensation are demanding enough that most trade subs who work for you regularly will need to be on your payroll or genuinely in business for themselves.
No statewide general contractor licence
This is the first thing to understand about New Hampshire. Unlike most states - which have licensing boards, threshold values, qualifying individuals, exams and registration fees for general contractors - New Hampshire has none of that at the GC level.
There is no state board that licences general contractors. No registration requirement for home improvement contractors at the state level. No dollar threshold that triggers a state registration. You can operate as a main contractor in New Hampshire on the strength of your business registration with the Secretary of State and the credentials of the trades you use.
Consumer protection for clients runs through RSA 358-A, the Consumer Protection Act. Construction defect disputes on residential work are handled through RSA 359-G, which I cover in the contracts section below. Neither of those statutes creates a licensing requirement for you.
What it means for the construction arbitrage model: the compliance burden in New Hampshire falls almost entirely on your subs' trade licences and your workers' compensation obligations, not on a GC licence of your own.
Electrical licensing - RSA 319-C
This is where most New Hampshire operators make mistakes. Electrical work is tightly regulated.
RSA 319-C, administered by the OPLC Electricians' Board, says that no electrical installation shall be made for compensation unless made by a person licenced by the OPLC - with limited exceptions (owner-occupied single-family dwellings, some utility work). That applies to every electrician working on your jobs.
The licence tiers are Apprentice, Journeyman and Master Electrician. An apprentice can work, but only under supervision. A Journeyman or Master must hold a current OPLC licence. The Electricians' Board administers exams; from May 2026 there are updated rules on substantially similar requirements for recognised out-of-state credentials.
What makes this serious for the main contractor: RSA 319-C:15 makes it a criminal offence - a misdemeanour if you are a natural person, a felony if the offending party is a business entity - to employ an unlicensed person to make electrical installations. This is not just a problem for the unlicensed sub. If you as the main contractor hire an unlicensed electrician, you face exposure under that same section.
Practical rule before every job: verify the electrical sub's licence at oplc.nh.gov licence lookup before they start. Keep a screenshot of the verification. If the licence is not there, do not use them.
Plumbing and mechanical licensing - RSA 153
Plumbing, gas fitting and mechanical work in New Hampshire is regulated by the Mechanical Safety and Licensing Board within the OPLC. The governing statute is RSA 153:27 through RSA 153:38, which replaced the former RSA 329-A.
There are three individual credential tiers: Apprentice Plumber, Journeyman Plumber and Master Plumber. A business that provides plumbing or gas services needs a Mechanical Business Entity licence from the OPLC, with a licensed Master Plumber or Master Gas Fitter as the responsible party. The Mechanical Business Entity application fee is around $250 (verify current fee at oplc.nh.gov/license-fees-mechanical-safety-and-licensing-board-0).
For HVAC: there is no separate statewide HVAC contractor licence. Gas-fired heating work falls under the Mechanical Licensing Board's gas fitting rules. Any work involving regulated refrigerants requires EPA 608 certification, which is a federal requirement regardless of state.
New mechanical licensing rule updates took effect in February 2026 through the OPLC. Verify current requirements directly with the Mechanical Safety and Licensing Board if you are sending subs to do gas or mechanical work.
Your plumbing and mechanical subs must hold their own Mechanical Business Entity licence - your own status as a GC does not cover them. Check their OPLC status at oplc.nh.gov before every job, the same as for electrical.
For building the sub network and the vetting process, the New Hampshire-specific discipline is the OPLC licence check on every electrical and mechanical sub, before every job.
Workers' compensation
New Hampshire requires workers' compensation insurance from the first employee under RSA 281-A. One person on your payroll means you need coverage. It is a private market state - you buy from a private insurer, not a state fund.
If a sub does not have their own workers' compensation insurance, they need to genuinely qualify as an independent contractor under RSA 281-A:2 VI(b)(1). If they do not qualify and an injury occurs, you can be treated as the employer and held liable for the claim.
Before any sub starts work: get either a current certificate of workers' compensation insurance or written documentation of their independent contractor status. Keep it on file per job.
The independent contractor test - all seven criteria
This is the part people underestimate in New Hampshire. The state uses a seven-criteria test under RSA 281-A:2 VI(b)(1), and all seven must be satisfied to treat a worker as an independent contractor for workers' compensation purposes. Fail any one and the person is an employee.
The seven criteria require that the worker:
- Has a federal EIN or Social Security number, or has agreed in writing to assume employer responsibilities under the chapter.
- Controls the means and manner of performing the work - the result is what you contract for, not the method.
- Sets their own schedule without direction from you, though deadlines and hour ranges are permissible.
- Hires and supervises their own assistants if any are needed.
- Holds themselves out as being in business for themselves, or is registered as a business with continuing obligations.
- Is contractually responsible for satisfactory completion of the work.
- Is free to work for other clients and is not required to work exclusively for you.
NH courts and the Compensation Appeals Board have enforced this strictly. A sub who works only for you, on your schedule, without their own business presence, will almost certainly be treated as your employee regardless of how the contract reads.
The safe harbour: a written agreement signed by both parties that describes the services and affirms the sub meets all seven criteria is prima facie evidence that those criteria are satisfied under RSA 281-A:2 VI(c). Use it, but make sure the working arrangement actually matches the agreement. A written contract that describes independence does not protect you if the relationship is in practice one of direction and control.
Contracts and RSA 359-G
New Hampshire has no home improvement contractor act that mandates specific written contract terms. General contract law and RSA 358-A, the Consumer Protection Act, govern disputes.
The one statutory requirement worth knowing is RSA 359-G, the Residential Construction Defects law. For any contract for the construction or improvement of a residence where the amount exceeds $5,000, the contract must include a specific right-to-repair notice in substantially the form set out in RSA 359-G:7. This is a mandatory notice, not an optional clause. Leave it out and you lose the right to respond to a defect claim before litigation can begin.
That is a low-cost obligation - it is a paragraph in a written contract - but it is easy to miss if you are using a standard template from another state.
For the full contracts picture - what goes in a sub agreement, what client contracts need to cover, payment terms and retention - that post covers it properly.
Running this in New Hampshire
New Hampshire is one of the most straightforward states in the US for construction arbitrage. No GC licence, no registration, no board. The compliance burden is real, but it is focused: your trade subs' licences and your workers' compensation obligations.
Practical order before the first job:
- Register your business with the New Hampshire Secretary of State at sos.nh.gov.
- Get workers' compensation insurance before you take on employees or subs who do not independently qualify as ICs under the seven-criteria test.
- Before booking any electrical sub: verify their OPLC licence at oplc.nh.gov. If the licence is not current, do not use them - hiring an unlicensed electrician is a criminal offence.
- Before booking any plumbing or gas sub: verify their OPLC Mechanical Business Entity licence at oplc.nh.gov.
- For residential jobs over $5,000: use a written contract and include the RSA 359-G:7 right-to-repair notice language.
- For subs you plan to treat as independent contractors: use a written agreement that covers all seven criteria and makes sure the working arrangement actually matches.
- Check local building department requirements in the specific city or town. Manchester, Nashua, Concord and Portsmouth each have their own permit and inspection processes.
The construction arbitrage model works well in New Hampshire. No state GC board to deal with. Focus on verified trade licences, clean sub documentation, and the right written contracts, and you are covered.
Last checked: 12 November 2026.
Frequently asked questions
Is construction arbitrage legal in New Hampshire?+
Yes. Construction arbitrage is legal in New Hampshire. Winning a construction contract, subcontracting the physical work to properly licensed tradespeople, and keeping the spread between what the client pays and what the subs cost is legal. That is how general contracting already works in this state. New Hampshire is one of the few states in the US with no statewide general contractor licence or registration requirement at all. What matters is that your trade subs hold the right state licences, your workers' compensation is in order, and you register your business with the Secretary of State.
Does New Hampshire require a contractor licence?+
No. New Hampshire has no statewide general contractor licence. It is one of the few states that does not require any licence, registration, or exam to operate as a general contractor. What it does require is that licensed trades - electrical, plumbing, gas fitting - are carried out by people holding the appropriate state licence from the OPLC. Local building departments in cities like Manchester, Nashua, Concord and Portsmouth handle permitting, so check municipal requirements in each town you work in.
Do my electrical subs need a New Hampshire state licence?+
Yes. All electrical installation work for compensation in New Hampshire requires a licence under RSA 319-C, administered by the OPLC Electricians' Board. This applies to every electrician your business uses, not just the company owner. Hiring an unlicensed person to make electrical installations - other than an apprentice - is itself a criminal offence under RSA 319-C:15. Verify every electrical sub's licence at oplc.nh.gov before they start work.
Do plumbing and mechanical subs need a New Hampshire state licence?+
Yes. Plumbing, gas fitting and mechanical work in New Hampshire is regulated by the Mechanical Safety and Licensing Board within the OPLC under RSA 153:27-153:38. A sub providing plumbing or gas services as a business needs a Mechanical Business Entity licence plus a Master Plumber or Master Gas Fitter on staff. Individual tradespeople hold Apprentice, Journeyman or Master credentials. Verify sub licences at oplc.nh.gov before they touch a job.
What is the independent contractor test in New Hampshire for workers' compensation?+
New Hampshire uses a seven-criteria test under RSA 281-A:2 VI(b)(1). All seven criteria must be met - fail any one and the worker is an employee for workers' compensation purposes. The criteria require that the worker: has a federal EIN or Social Security number; controls the means and manner of the work; sets their own schedule without employer direction; hires and supervises their own assistants; holds themselves out as an independent business; is contractually responsible for satisfactory completion; and can work for other clients without restriction. NH courts enforce this test strictly. A signed written agreement affirming these criteria creates prima facie evidence that the test is satisfied.
What happens if I hire a subcontractor without workers' compensation in New Hampshire?+
If a sub does not have their own workers' compensation coverage and is not genuinely an independent contractor under RSA 281-A:2 VI(b)(1), you may be treated as the employer and held responsible for any workplace injury. New Hampshire requires workers' compensation from the first employee under RSA 281-A. Get either a current workers' compensation certificate or written IC documentation from every sub before they start work, and keep it on file.
Is construction arbitrage the same as construction dropservicing in New Hampshire?+
Yes - same model, different name. Construction dropservicing, contractor arbitrage and construction arbitrage all describe the same structure: you hold the prime contract, your licensed subs do the physical work, you keep the margin. All the same New Hampshire compliance requirements apply - electrical and plumbing sub licences, workers' compensation, Secretary of State registration - regardless of what you call it.
Mohamed El HadriCo-Founder
I'm a co-founder of several construction companies. I built a construction business from a 30-van operation into a lean model with 1,500+ subcontractors in the database - winning the work as the main contractor, subbing it out, and running it as a system from a laptop across multiple countries. I write this site from what actually works.
@mointhemarket · 35.1k followers on Instagram →Run the model with people who already do
Reading the method is step one. Inside Construction Arbitrage Players you connect with players from around the world who run construction arbitrage every day and make real money from it - share your deals, get answers, and get in the game. Founding-member access is open now.
For the operator life and the inside story, see Contractor Club.
THE EDGE - the listening book on how the money really moves through a contracting business - is out now. Listen free, or see what is inside.
The Family Secret - how construction arbitrage really works - is coming soon.
A construction business built this way is a sellable asset
Systems, subs and margin - that is exactly what buyers pay for. If you own a construction or trade business and the exit is on your mind, list it on ContractorExit, the marketplace for buying and selling trade businesses. The valuation is free, so you find out what it is worth before you decide anything.
Get the Construction Arbitrage playbook
One sharp email a week: real numbers, live deal breakdowns, and the systems that let you run jobs you never visit. No fluff, unsubscribe anytime.



